LED Flexible Strip-3528-120D

LED Flexible Strip


Inquiry Now

Inquiry details *



Product Attributes :

1、Low power,small GCV

2、Good color consistency,luminous angle(120)

3、Good flexibility ,Can beng without breaking

4、The product is light,thin,suitable for small space install

5、Convenient installation,ench 3led can be cut,size up to you

 Lamp parameter 规格参数

Power 功率8W/M
Input Voltage  输入电压DC12V
 LED Brand   LED品牌Epistar
LED Quantity   LED数量120PCS
LED Model3528
  LED Luminous 15-18 Lm /W
IP Rating  防护等级IP20/IP65/IP68
Junction Temperature  LED结温≤80
Color Temperature  色温3000K/4500K/6500K/8000K/RGB
Color Rendering Index   显色指数Ra80
Light Distribution    配光曲线Symmetric/round spot  对称式/圆形光斑
Life Span  光源寿命≥30,000Hrs(Note3)
Certification  认证CE/ROHS

※Color temperature figure色温图


Application 适用场所

A significant difference from other light sources is that the light is more directional, i.e., emitted as a narrower beam. LED lamps are used for both general and special-purpose lighting. Where colored light is needed, LEDs that inherently emit light of a single color require no energy-absorbing filters.
 LED FLEXIBLE STRIP lamps have longer life expectancy and higher efficiency (more light for the same electricity) than most other lighting when used at the proper temperature. LED sources are compact, which gives flexibility in designing lighting fixtures and good control over the distribution of light with small reflectors or lenses. Because of the small size of LEDs, control of the spatial distribution of illumination is extremely flexible, and the light output and spatial distribution of an LED array can be controlled with no efficiency loss.
LEDs using the color-mixing principle can emit a wide range of colors by changing the proportions of light generated in each primary color. This allows full color mixing in lamps with LEDs of different colors.Unlike other lighting technologies, LED emission tends to be directional (or at least lambertian), which can be either advantageous or disadvantageous, depending on requirements. For applications where non-directional light is required, either a diffuser is used, or multiple individual LED emitters are used to emit in different directions.